Owon HDS-N Series Manual do Utilizador descarregar pdf (Página 83)

OWON HDS-N Series Handheld DSO & DMM 10-Appendix

10. Appendix

10.1 Appendix A: Specifications

10.1.1 Oscilloscope

Only if other instructions are provided, are all technical specifications applicable to the probe with

the 10X attenuation switch setting and the HDS-N series digital type oscilloscope. In order to be

up to these specifications, the oscilloscope should meet the following requirement.

■ The instrument should operate continuously for more than 30 minutes under the specified

operating temperature.

■ If the operating temperature is up to or larger than 5 Celsius degrees, the system function

menu must be opened to make the system perform a "Auto- calibration" procedure (see

"calibration" on P55).

Except those specifications marked with the word Typical, all specifications can be up to.

Sampling

Sampling modes

Normal sampling

Peak detection

Average value

Sampling rate

100 MS/s----HDS1022M-N

Max 500 MS/s----HDS2062M-N

Max 1 GS/s----HDS3102M-N

Input

Input coupling

DC, AC, Ground

Input impedance

●1 MΩ±2% connected in parallel with 20 pF±5 pF

----HDS1022M-N

●1 MΩ±2% connected in parallel with 15 pF±5 pF

----HDS2062M-N, HDS3102M-N

Probe attenuation coefficient

1X, 10X, 100X, 1000X

Max. Input voltage 400 V (peak)

Channel delay time（typical）

150 ps

Horizontal

Sampling rate range

0.25 S/s - 100 MS/s----HDS1022M-N

0.25 S/s - 500 MS/s----HDS2062M-N

0.25 S/s - 1 GS/s----HDS3102M-N

Waveform interpolation

（sin x）/x

1 2 ... 78 79 80 81 82 83 84 85 86 87 88

Sem comentários

Owon HDS-N Series Manual do Utilizador Página 83