Owon HDS-N Series Manual do Utilizador descarregar pdf (Página 36)

OWON HDS-N Series Handheld DSO & DMM 7-Using the Multimeter

2. Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C

banana jack input.

3. Connect the red and black test leads to the resistor. The resistor value readings are shown on

the screen in Ohm.

Now, you can see a screen that looks like the following figure 21.

Figure 21: Resistance Measurement

7.4.2 Measuring Diode

To make a measurement on the diode, do the following:

1. Press the R key and R appears at the top of the screen.

2. Press SET key until the following is displayed on the screen

3. Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C

banana jack input.

4. Connect the red and black leads to the resistor and the diode resistor readings are displayed

on the screen in V.

Now, you can see a screen that looks like the following figure 22.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 87 88

Sem comentários

Owon HDS-N Series Manual do Utilizador Página 36